The HOT SPOT VC and MICRO SPOT VC
The impedance of the HOT SPOT VC and MICRO SPOT VC is determined by the position of its volume control. Use the table below to determine the actual impedance.
Note: Each Hot Spot VC comes equipped with a Speakon and two 1/4"
speaker jacks, all of which are wired in parallel to allow easy "daisy chaining' of multiple Hot Spots. The aluminum screw-on jack caps on the 1/4" jacks should remain in place when those jacks are not in use to keep the cabinet airtight and to avoid any unwanted "whistling"
